Rotary Pneumatic Cylinder - MCRQ
Feature
- Bores : φ 15 , 20 , 25 , 32 , 40 ( mm ) 。
- The use of a centrally located hole and the reference hole to ensure accurate positioning.
- On the working platform angle adjusting screw to control the use of the angle is 0 ° ~ 190 °.
- Interior design is the use of double and single gear rack and then link it generates a rotating motion.
- Design of the hollow shaft to facilitate wiring and piping.
- Alternatively buffer as buffer means.
- Easy installation work platform.
Ordering Code
Detailed Specifications
| Actuation mode | Double action |
| Bores ( mm ) | φ 15 , 20 , 25 , 32 , 40 |
| Pipe diameter size | φ 15 : M 5 × 0.8 φ 20 ~ φ 40 : Rc 1 / 8 |
| Fluid | Air |
| Working pressure range | Adjusting bolt : 0.1 ~ 1 MPa ( ※ 1 ) Buffer : 0.1 ~ 0.6 MPa ( ※ 2 ) |
| Allow impact pressure | 1.5 MPa |
| Buffer means | Adjustment screw: φ 15, 20 ( Rubber gasket ), φ 25, 32, 40 ( A rubber gasket and pneumatic cushion ) Buffer: φ 15, 20 ( Hydraulic cushioning ), φ 25, 32, 40 ( Hydraulic and pneumatic buffer buffer ) |
| Angle adjustment range | 0 ° to 190 ° ( Mmax. ) ※ 3 |
| It does not reduce the energy absorption capability of the minimum angle of rotation | 52 ° , 40 ° , 60 ° , 62 ° , 82 ° |
| Sensor | RT Series |
| Weight | Adjusting bolt : 0.60 ~ 7.67 kg Buffer : 0.61 ~ 7.72 kg |
| Remark | ※ 1: Maximum working pressure is limited to the maximum allowable impact buffer. ※ 2: No-load status. ※ 3: Note that setting the rotation angle inside the buffer is less than ( Does not reduce the energy absorption capacity of the smallest rotation angle ) of the value, that is less than the effective stroke of the piston stroke buffer, then the energy absorption capacity will decrease. |
Related Accessories
| Product name | Product description | |||
|---|---|---|---|---|
| Sensor / RT |  |
RT ( Reed ) 、 RTN ( No contacts NPN ) 、 RTP ( No contacts PNP ) , Applicable cylinder model : MCRJ , MCRQ , MCRQ-S , MCHG2 , MCHU , MCHY 。 | ||